HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL980 G7 Overheating issues reported by iLO

 
LennieDH
Occasional Visitor

HP DL980 G7 Overheating issues reported by iLO

Hi everyone,

I'm facing strange Integrated Management Log entries related to system overheating:

 

 

   Informational - Automatic Operating System Shutdown Due to Overheat Aborted 
   Repaired - Automatic Operating System Shutdown Initiated Due to Overheat Condition 
   Repaired - System Overheating (Temperature Sensor 4, Location CPU, Temperature 78C) 
   Informational - Automatic Operating System Shutdown Due to Overheat Aborted 
   Repaired - Automatic Operating System Shutdown Initiated Due to Overheat Condition 
   Repaired - System Overheating (Temperature Sensor 4, Location CPU, Temperature 79C) 
   Repaired - Automatic Operating System Shutdown Initiated Due to Overheat Condition 
   Repaired - System Overheating (Temperature Sensor 4, Location CPU, Temperature 78C) 
   Informational - Automatic Operating System Shutdown Due to Overheat Aborted 
   Repaired - Automatic Operating System Shutdown Initiated Due to Overheat Condition 
   Repaired - System Overheating (Temperature Sensor 4, Location CPU, Temperature 78C) 
   Repaired - Automatic Operating System Shutdown Initiated Due to Overheat Condition 


I've found out that this was a known issue of older versions of iLO firmware but now we are on:

iLO Firmware Version 1.80 Jul 11 2014


I've also powered off the affected server and also performed an iLO reset but entries are still appearing.

We have several identical servers (same iLO FW release) but this one is the only server affected by this problem.

What can I do?


Could an iLO FW upgrade fix this issue?


Thank you in advance,

Regards.

 

4 REPLIES
Jan Soska
Honored Contributor

Re: HP DL980 G7 Overheating issues reported by iLO

Hello,

update all firmwares in your server - bios, ilo, etc. If problem still persists, it seems you have real problem.

 

Jan

LennieDH
Occasional Visitor

Re: HP DL980 G7 Overheating issues reported by iLO

Hi Jan,

thanks for replying.

Yes, unfortunately it seems an hardware related issue since a complete FW upgrade using SPP didn't fix the problem.

I'm gonna open a case to HP.

Thank you,

Regards.

Jan Soska
Honored Contributor

Re: HP DL980 G7 Overheating issues reported by iLO

ok, let us know the results...

 

Jan

LennieDH
Occasional Visitor

Re: HP DL980 G7 Overheating issues reported by iLO

Hi Jan, HP replaced affected CPU and issue is gone.

Thank you for your reply.

Best Regards.