HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP EG0600FCSPL not detected as authenticated HP drives

 
DavidSh
Occasional Visitor

HP EG0600FCSPL not detected as authenticated HP drives

Dear All,

I have DL360p Gen8 with the following configuration:

Dual CPU Intel E5-2640v2
Memory 16GB x 4 (64GB)
HDD 600GB 10K SAS 6G (Raid 10)

This server has been running about 4 months without any problem and yesterday I upgrade the firmware using HP SUM to the lastest version. The drives start detected as not authenticated HP drives after server reboot. Is this related to HDD firmware issue? If I need to upgrade the HDD firmware for HPD0 to HPDxx, please tell me where is the correct firmware for this drive? or I need to downgrade the P420i? I have been search on the HPE website but I can't find any firmware for this drive (EG0600FCSPL). Here is the details:

-Controller on System Board
Logical View Physical View
Controller Status OK
Serial Number 001438022C294A0
Model Smart Array P420i Controller
Firmware Version 8.00
Controller Type HPE Smart Array

-Drive Enclosure Port 1I Box 1
Status OK
Drive Bays 4

-Drive Enclosure Port 2I Box 0
Status OK
Drive Bays 4

-Logical Drive 01
Status Degraded
Capacity 1117 GiB
Fault Tolerance RAID 1/RAID 1+0
Logical Drive Type Data LUN
Encryption Status Not Encrypted

-Physical Drive in Port 1I Box 1 Bay 1
Status Degraded (Not authenticated)
Serial Number 53I0A01LFTM21320
Model EG0600FCSPL
Media Type HDD
Capacity 600 GB
Location Port 1I Box 1 Bay 1
Firmware Version HPD0
Drive Configuration Configured
Encryption Status Not Encrypted


-Physical Drive in Port 1I Box 1 Bay 2
Status Degraded (Not authenticated)
Serial Number 53I0A01MFTM21320
Model EG0600FCSPL
Media Type HDD
Capacity 600 GB
Location Port 1I Box 1 Bay 2
Firmware Version HPD0
Drive Configuration Configured
Encryption Status Not Encrypted


-Physical Drive in Port 1I Box 1 Bay 3
Status Degraded (Not authenticated)
Serial Number 53E0A026FTM21320
Model EG0600FCSPL
Media Type HDD
Capacity 600 GB
Location Port 1I Box 1 Bay 3
Firmware Version HPD0
Drive Configuration Configured
Encryption Status Not Encrypted


-Physical Drive in Port 1I Box 1 Bay 4
Status Degraded (Not authenticated)
Serial Number 53E0A0AIFTM21320
Model EG0600FCSPL
Media Type HDD
Capacity 600 GB
Location Port 1I Box 1 Bay 4
Firmware Version HPD0
Drive Configuration Configured
Encryption Status Not Encrypted

 

 

As far I know, the warning will not degrade the disk performance but it's annoying and I want to solve this issue. 

Thank you.