ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Gen10 Servers -System Management Homepage??

dnlvry
Occasional Contributor

HP Gen10 Servers -System Management Homepage??

I support around 50 HP servers from Gen6 up to Gen9 and we've always used the HP Array Configuration Utility and System Management Homepage to check system health etc, but I know how understand this isn't compatible with Gen10.

We have the Smart Storage Adminsitrator installed however what software should we be using to check the server health? This is on HP ML110 Gen10 and HP Microserver Gen10 (using Marvell Storage Utility).

I've tried running the HP Proliant Support Pack 2018-03 and Insight Manager but neither seem to give me the information I require so any assistance would be gratefully received!

3 REPLIES
Torsten.
Acclaimed Contributor

Re: HP Gen10 Servers -System Management Homepage??

gen10 supports agentless management only.

have a look at insight rs, ILO amplifier or even oneview to manage them in a single view.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
dnlvry
Occasional Contributor

Re: HP Gen10 Servers -System Management Homepage??

Thank you for your response, however I don't want a single view of all the servers. We are a MSP and would like to have a health view for each individual server on the server itself rather than a central panel, much like SMH used to allow. It appears to me that the 3 products listed don't offer that, especially when I look at OneView and it offers it for HyperV only? I am looking to use this on physical servers.

Jimmy Vance
HPE Pro

Re: HP Gen10 Servers -System Management Homepage??


@dnlvry wrote:

Thank you for your response, however I don't want a single view of all the servers. We are a MSP and would like to have a health view for each individual server on the server itself rather than a central panel, much like SMH used to allow. It appears to me that the 3 products listed don't offer that, especially when I look at OneView and it offers it for HyperV only? I am looking to use this on physical servers.


load 'AMS' on the server and you can get all health and system information you need from the iLO web interface. 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!