ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP HL150 G2 and Adaptec 2610SA with 2TB SATA disk

pavelka
Occasional Visitor

HP HL150 G2 and Adaptec 2610SA with 2TB SATA disk

Hi,

I have HP Proliant ML150 G2 with Adaptec 2610SA Controller.

In SATA 1 and 2 channel I already have installed two mirrored 160GB SATA disk.

Is there any possibility to add one or two separate or mirrored 2TB SATA drives?

If I placed them (2TB SATA) to the controller I can see them only in the disk utilities menu, but I'm not able to manage any array.

Any idea??

Thanks a lot
2 REPLIES

Re: HP HL150 G2 and Adaptec 2610SA with 2TB SATA disk

Hi,

Check below link for quick specs for ML150 g2 server, not support 1TB SATA Disk.
http://h18004.www1.hp.com/products/quickspecs/12092_div/12092_div.HTML

Maybe firmware update can solve.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Lazarix
Occasional Advisor

Re: HP HL150 G2 and Adaptec 2610SA with 2TB SATA disk

Are you choosing 'manage array' instead of 'create array'?
The 2410sa will not support 2TB drives due to the 2TB array limit on the controller (it will try to create a RAID-10 array which can't be done with 2 drives). You could however take an image of the existing 160gb array (using acronis or ghost) and put in 4x 1TB (or maybe 2TB) drives and create several RAID-10 arrays of 2TB or smaller. There will be a performance hit due to the multiple read/write access though.
Live by the sword