ProLiant Servers (ML,DL,SL)
1751980 Members
4896 Online
108784 Solutions
New Discussion юеВ

HP HP ProLiant ML310E Gen8 Fan Problem

 
Valdd00
Visitor

HP HP ProLiant ML310E Gen8 Fan Problem

Hi Guys,

I have a problem with HP ProLiant ML310E fan that spin up at max, down quiet, spin up at max, down quiet.

This video explains better than 1000 words

https://drive.google.com/open?id=1cpEw_uHU8fTNnZhKtT37JKzeUvUc8PWp

I update various firmware, but the situation is the same.

In ILO management is all OK and Green.

Nothing strange in LOG.

 

Specs:

-P222 controller raid

-4 x 4TB HP Sata disk

-4 x 8Gb ram ECC

-intel Xeon E3-1220 V2

-Windows Server 2019

 

Thank you

4 REPLIES 4
sudhirsingh
HPE Pro

Re: HP HP ProLiant ML310E Gen8 Fan Problem

Hi,

Is it Power supply fan rev up/down ?

Remove/reseat both the power supply,

Swap Power supply or swap with any other server if possible.

Maksure ILO and BIOS are updated to latest.

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

Valdd00
Visitor

Re: HP HP ProLiant ML310E Gen8 Fan Problem

Hi @sudhirsingh ,

yes, it's power supply fan rev up/down. (both)

I try to remove, reset.

I update bios and ilo firmware.

The result is the same

 

I haven't a spare power supply from other server

sudhirsingh
HPE Pro

Re: HP HP ProLiant ML310E Gen8 Fan Problem

Hi,

I believe you need to replace them.

You should raise a support case with HPE if server is still under contract.

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

cdtluna
New Member

Re: HP HP ProLiant ML310E Gen8 Fan Problem

any updates?

I have the same results with 2 servers if i try to install a Pcie card.  once i remove them, reset the cpu, reset the powersupply, disconnect the power to main board and put back together, the noise goes away

i have all firmware updated as well as bios.

it did the same noise since i bought it and i could never figure it out.

power supplies are good..

 

any thoughts?