HP HSV450 SCSI ARRAY DEVICE

[Marinel Rivas]

Good Afternoon,

Please if you could help me with the following in the device manager of a Proliant DL 580 G5 with Windows Server 2003, I need the following driver that I can not, HP HSV450 SCSI Array Device.

Thank you very much

[Michael A. McKenney]

Never used that site before. Only one with drivers. Not sure how they are. Be careful

[Johan Guldmyr]

Howdy,

Michael: Did you miss the link?

Marinel: The HSV450 is the controller in the EVA8400.

Do you have the MPIO and DSM installed?

Also, this link might be able to help you.
It is for the HSV300/EVA4000 - but hopefully the HSV450 is in there too:

(thread deleted)

[Marinel Rivas]

Good Day

Yesterday was installed on the computer MPIO, without good results even if the fault persists, and the same occurs as in the device manager, there is another HP HSV450 SCSI Array Device. ?

Pending any suggestions, I will continue investigating to resolve the fault, thank you very much.
Escuchar
Leer fonéticamente
Diccionario - Ver diccionario detallado

[Michael A. McKenney]

You could call HP support for drivers. I found nothing listed. It could be too old for Windows 2003 Server.

[Johan Guldmyr]

Did you install the MPIO EVA DSM as well?
There are 8 paths in there but maybe that is "normal" for your situation.

[kataping]

I have the same problem too.

Have you resolved this problem???

regards

Marco

---

@Marinel Rivas wrote:
Good Day

Yesterday was installed on the computer MPIO, without good results even if the fault persists, and the same occurs as in the device manager, there is another HP HSV450 SCSI Array Device. ?

Pending any suggestions, I will continue investigating to resolve the fault, thank you very much.
Escuchar
Leer fonéticamente
Diccionario - Ver diccionario detallado

---

[Michael_AG]

Are you using Qlogic or Emulex HBA's? The correct driver will have the HSV40 device listed in the SAACD.inf file