HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP IP Console Switch and Windows 2008 server

 
Wayne
Frequent Advisor

HP IP Console Switch and Windows 2008 server

Hi

We have the Problem, that we don't have a mouse cursor on the Windows 2008 servers with our KVM IP Console Switch 1x1x16.
The firmware are actual 03.00.13 and the adapters 03.00.06
All other OS works without a problem, only 2008 we don't have a Mousecursor.

Any suggestions?
Regards
4 REPLIES
KarloChacon
Honored Contributor

Re: HP IP Console Switch and Windows 2008 server

hi

any particular server? or all of them
I seen a similar issue with Dl160 G5


bye
Didn't your momma teach you to say thanks!
Wayne
Frequent Advisor

Re: HP IP Console Switch and Windows 2008 server

In our case 2 DL380 G5 servers. We have 6 other DL380 G5 with Server 2003 without any problems.

So it must be the combination of both.
Wayne
Frequent Advisor

Re: HP IP Console Switch and Windows 2008 server

Karlo

We don't use the ILO, we have this problem with the KVM IP Switch.