ProLiant Servers (ML,DL,SL)
1748089 Members
4979 Online
108758 Solutions
New Discussion

Re: HP ML150 G6 BIOS recovery ?

 
Oeste
Occasional Advisor

HP ML150 G6 BIOS recovery ?

Hi,

after flashing the bios with an hp boot-usb-stick the server has no signal on the vga-port and beeps 13 times. That beep should be "ROM image does not match BIOS requirements".

So what can i do to get this bios recovered? i thought the ml150 g6 has an rendundant bios?


Regards,
Kai Oeste
9 REPLIES 9
Proliant Watch
Valued Contributor

Re: HP ML150 G6 BIOS recovery ?

Try to install a previous version of BIOS

or try clearing NVRAM

http://hpproliant.blogspot.com/2010/07/clear-nvram-hp-proliant-server.html
Oeste
Occasional Advisor

Re: HP ML150 G6 BIOS recovery ?

Thanks for your answer but i can´t find the "System Maintenance Switch" in the "ProLiant ML150 G6 Maintenance and Service Guide.pdf" manual?

Regards,
Kai Oeste
Oeste
Occasional Advisor

Re: HP ML150 G6 BIOS recovery ?

hi again,

i also can´t find any procedure for clearing the nvram in the manuals - how is it done?

regards,
Kai Oeste
Proliant Watch
Valued Contributor

Re: HP ML150 G6 BIOS recovery ?

Check for clearing CMOS/BIOS
Oeste
Occasional Advisor

Re: HP ML150 G6 BIOS recovery ?

i have cleared the cmos/bios by removing the bios battery - i also tried the method of activating the cmos clear jumper...

any other ideas?
Proliant Watch
Valued Contributor

Re: HP ML150 G6 BIOS recovery ?

Try installing a previous version of BIOS, you can click on revision history on the BIOS download page to get previous version
Oeste
Occasional Advisor

Re: HP ML150 G6 BIOS recovery ?

hi,

i don´t know how to downgrade the bios without any signal on screen? There is absolute no signal on the screen... only 13 beeps!
almark
Occasional Advisor

Re: HP ML150 G6 BIOS recovery ?

Have you tried to load the server with BMC recovery mode?
Oeste
Occasional Advisor

Re: HP ML150 G6 BIOS recovery ?

hi,

i have already tried the BMC Recovery Mode - nothing has changed.. any other ideas?

please :-/