ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ML310 G5 Tower Server - RAID Controller

 
SOLVED
Go to solution
karant
Advisor

HP ML310 G5 Tower Server - RAID Controller

Hi All, I have a server HP ML310 G5 Tower Server, it doesn't have raid controller. I planned to buy and fix a raid controller. 

 

sas 4 bay hard drive cage p/n 451781-001 has been directly connected to 450120-002 Motherboard

 

Can anyone suggest the model of the raid controller.

 

5 REPLIES
Murali_V
HPE Pro

Re: HP ML310 G5 Tower Server - RAID Controller

Refer the HP ProLiant ML310 Generation 5 (G5) QuickSpec document for more informaion on option parts:

 

Storage:
http://h18000.www1.hp.com/products/quickspecs/12858_div/12858_div.HTML#Storage

 

Storage Controllers under Additional Options :
http://h18000.www1.hp.com/products/quickspecs/12858_div/12858_div.HTML#Additional Options

 

Please let us know if any other specific question.

 

Regares, 

Murali Mohan

 

Was this post useful? - You may click the KUDOS! thumb below to say thank you...
karant
Advisor

Re: HP ML310 G5 Tower Server - RAID Controller

I found in the technical doc, it has built-in  Embedded SATA with integrated SATA RAID 0,1 controller.

 

Looks like I don't want to buy the controller and I can use the exisiting controller  to setup RAID-1,

 

Am I correct?

 

Murali_V
HPE Pro

Re: HP ML310 G5 Tower Server - RAID Controller

Hi, 

I just checked the server Specs and this server models comes has 2 different controllers. HP SC40Ge SAS HBA with RAID (in PCIe slot) (SAS Models) & Embedded SATA with integrated SATA RAID 0,1 (SATA/SAS Models). And, as per your information, the cable is connected to mother board hence the controller you have is SATA/SAS models and Embedded SATA with integrated SATA RAID 0,1. This models supports RAID 0 and 1. And you need to enable to RAID controller in RBSU.

 

Configuring the embedded SATA RAID feature:

  • During boot press the F9 key to launch RBSU
  • Select Advanced Options>Embedded SATA RAID>Enable RAID.
  • Press the F10 key twice to exit RBSU.
  • After the system reboots, press the F8 key to enter the HP Embedded SATA setup utility.

For more information and detail steps refer the User Guide page number 50 for Configuring the embedded SATA RAID feature.

 

HP ProLiant ML310 Generation 5 Server User Guide : http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c01272003-2%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

 

Also, refer HP Embedded SATA RAID Controller User Guide: 

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00771065/c00771065.pdf 

 

Hope the above inforamion useful. 

Was this post useful? - You may click the KUDOS! thumb below to say thank you...
karant
Advisor

Re: HP ML310 G5 Tower Server - RAID Controller

HI Murali,

 

Thanks for your reply, I want only RAID-1, in case one harddrive failed I can simple replace and run the business. 

 

I think, this server supports non-hot-plug SATA hard drives. but it has has 4 bay hard drive cage p/n 451781-001, I am not sure, can I do the hot plug if I enable the raid in RBSU and setup RAID-1? 

 

Murali_V
HPE Pro
Solution

Re: HP ML310 G5 Tower Server - RAID Controller

As per the ML310 G5 Server Spare Parts list this server Hard drive cage with hard drive backplane part number is 459191-001 and it is hotplugable.

In the hot plug procedure if more than one drive is installed and configured with a RAID 1 or better configuration you can remore the hard drive when server is running.

 

Ref: 

HP ProLiant ML310 G5 Server - Spare Parts

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01332090

 

HP Customer Self Repair Services Media Library

http://h20464.www2.hp.com/results.htm?SID=3580655&MEID=FA236DDD-270A-4BCC-9D0B-8D3624474D10

 

 

Dont forget to click on KUDOS Star & mark this post as solved if this informaion helpful. 

 

Regards, 

Murali Mohan

Was this post useful? - You may click the KUDOS! thumb below to say thank you...