ProLiant Servers (ML,DL,SL)

HP ML350 Gen9 Firmware Update (Won't Boot)

 
ParabonDabe
Visitor

HP ML350 Gen9 Firmware Update (Won't Boot)

After applying firmware-system-p92-2.80_2020_10_16-1.1.i386.rpm, my system now says:

POST Error: 231-DIMM Configuration Error - No memory is available. If DIMMs are installed, verify that the corresponding processor is installed. - System Halted


I've tried re-uploading P92_2.80_10_16_2020.signed.flash via iLO, and although the Integrated Management Log says, Firmware flashed (System BIOS - P92 v2.80 (10/16/2020)), the problem persists. 

(The Diagnostics tab still says both the Active and Backup ROMs are "P92 v1.40 (05/06/2015)" but I'm guessing that's just because it hasn't made it past POST, yet...)

So I guess my question is: how dead am I?  Is there any other way to un-brick this sucker?  Thanks!

1 REPLY 1
SanjeevGoyal
HPE Pro

Re: HP ML350 Gen9 Firmware Update (Won't Boot)

 

Hello,

 

Check the server with minimum configuration.

 

  1. One processor and one memory.
  2. Check all the combination of memories and processor,
  3. Replace the suspected parts Accordingly.

 

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee

Accept or Kudo