HP ML350G4 with NC7170

[Kevin_peng]

When I insert NC7170 in ML350G4 Server,and set speed to 100Full,but I found after 1~2 hours network failed.I can makesure the hardware is OK and upgraded driver and firmware to the latest version
,If I replace ethernet card to intel chipset ,server work is ok.

Do you have any suggestion

[Brian_Murdoch]

Hi Kevin,

The NC7170 is based on the Intel 82546EB.

Try loading the Intel drivers and replacing the HP ones to see if this makes any differece. This should determine if the problem is an HP driver issue.

http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=991〈=eng

I hope this helps.

Brian