ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ML370 G3 with HP DAT 24x6 autoloader c1557

 
Arnold Hirnschrodt jun.
Occasional Visitor

HP ML370 G3 with HP DAT 24x6 autoloader c1557

Hello,

i tried to install a HP DAT 24x6 autoloader c1557 into our HP ML370 G3 but i don´t know how to connect der autoloader to the scsi interface.

where should i connect:
- Integrated Dual Channel Wide Ultra3 SCSI Adapter
- HP SmartArry 641

Which scsi adapters to i have to use because the c1557 is Single-ended, Narrow SCSI-2

Regards,
Arnold
1 REPLY
JohnWRuffo
Honored Contributor

Re: HP ML370 G3 with HP DAT 24x6 autoloader c1557

Arnold:

Is this an internal or external model?

If internal, you need an addapter, click here:
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=5064-4688
or
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=C5710A

You should connect this device to your on board controller not the array controller.

If this is the external model, you need a 50pin to 68pin HD cable:
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=C5665A

Then you will need a narrow terminator. (which you may have)
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt