HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

HP NC320i Jumbo frames on 2008 x64

Occasional Contributor

HP NC320i Jumbo frames on 2008 x64

Good Evening ,

I have a spare ML310 G4 in the test lab here and was wondering if any folks knew if the integrated NC320i NIC on the machine supports jumbo frames.

The operating system is 2008 x64 server at present and is running with the latest network driver yet don't seem to see the option in the adapter or network configuration utility.

Anyone confirm that it does or does not support Jumbo frames?

Many Thanks


Re: HP NC320i Jumbo frames on 2008 x64


When either the embedded NC320i or the NC1020 is teamed with other HP NICs, Jumbo Frames and LSO features are automatically disabled

Kind Regards,
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Occasional Contributor

Re: HP NC320i Jumbo frames on 2008 x64

Thanks for the Reply , there is only the integrated Nic in the server in use and teaming is not enabled.