HPE Community
ProLiant Servers (ML,DL,SL)
1752448 Members
5996 Online
108788 Solutions
New Discussion

HP Network Team and VMWare network team

 
T. Cooper
Frequent Advisor

‎08-26-2013 10:57 AM

‎08-26-2013 10:57 AM

HP Network Team and VMWare network team

I have an esx installation (5.1) and stand-alone proliant servers. I have teamed the NIC(s) on my ESX host per the following document:

 

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004048

 

It specifies load blance be set to src-dst-ip.

 

Will that work for the HP team on teh stand alone servers if set to Auto/Auto and LACP running on the Cisco 6500?

 

This document seems to suggest src-mac is the right load balance for HP.

 

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a008089a821.shtml

 

How are people handlign the difference in suggested load-balance?

 

 

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.