HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Network Team

 
BERTON_1
Frequent Advisor

HP Network Team

Hello,

I have created a team of 2 NICs on 2 DL380 g4.
One for a backup server and one for a SAN.

when users are connected to the san I see a network traffic on the 2 NICs of the SAN server.

when the backup server do 2 jobs on 2 servers, there are network traffic on the 2 NICs of the backup server.


but when the backup server backup the san server they use only 1 NIC.

is it possible to use the 2 cards because the LTO4 drive is faster 1 NIC?

the team parameters
Team type selection: "automatic (recommended)"
Transmit load balancing method : "automatic (recommended)"
the switch is a procurve 5406zl witch use lacp

regards

Pascal

1 REPLY
Daniel Leblanc
Honored Contributor

Re: HP Network Team

Tip on getting help in HP Forum, apply you re points you have 0 out of 12 messages.

These are situated in every message in a thread,next to date and time has UNASSIGNE.

Dan