ProLiant Servers (ML,DL,SL)
1748140 Members
3569 Online
108758 Solutions
New Discussion юеВ

Re: HP Network teaming.

 
Robert Rawson
New Member

HP Network teaming.

I have an HP Proliant Server with several network cards that i tried to "Team" last night with the IP address of 192.168.42.16, the process completed successfully and all the computers on my network could successfully see and ping the server and the server could successfully see and ping all the computers on the network apart from my router which has an IP address of 192.168.42.15. Out of interest i changed the team IP address to 192.168.42.18 and I was then able to ping my router. It is actually quite important that my server remains 192.168.42.16. Is this a known problem and i am able to get around it?

I hope my question makes sense

Many thanks
6 REPLIES 6
Rob Leadbeater
Honored Contributor

Re: HP Network teaming.

Hi,

Could you possibly expand a little on exactly what you did... ie what was the configuration before you teamed the cards ?

The output of:
ipconfig /all

would probably be useful to see as well - I'm assuming you're running Windows.

Any other information on the network setup you've got would also be useful...

Cheers,

Rob
wasim081
Occasional Advisor

Re: HP Network teaming.

hi Robert can u tell how u configure ip address after configuring the nic into team
i have configure the nic into team but not know how to configure the ipadress that make throughput for my local network

configuration as follo
nic 1 = 192.168.1.2 255.255.255.0
Dns 202.142.160.2
gw 192.168.1.1

nic 2 = 125.209.70.5 255.255.255.192
gateway 125.209.70.1
DNS 202.142.160.2

Lan nic adress
192.168.0.1 255.255.255.0
gw= no
DNS 202.142.160.2
Robert Rawson
New Member

Re: HP Network teaming.

NIC 1.

IP 192.168.42.16
SUBNET 255.255.255.0
GATEWAY 192.168.42.15

NIC 2

IP 192.168.42.17
SUBNET 255.255.255.0
GATEWAY 192.168.42.15


NIC 3

IP 192.168.42.18
SUBNET 255.255.255.0
GATEWAY 192.168.42.15


NIC 4

IP 192.168.42.19
SUBNET 255.255.255.0
GATEWAY 192.168.42.15

When I team the NICS i use the following setting on the "New HP Network connection"


NIC 2

IP 192.168.42.16
SUBNET 255.255.255.0
GATEWAY 192.168.42.15

At this point the server can ping every IP address in the company but is unable to ping 192.168.42.15, but when i move it to .17 i am then able to ping 192.168.42.15
Rob Leadbeater
Honored Contributor

Re: HP Network teaming.

Hi Robert,

Could you post the output of:

ipconfig /all

please.

Cheers,

Rob
Robert Rawson
New Member

Re: HP Network teaming.

Yes sure, I had to disable it so hopefully one night this week i will re-team it.
Rob Leadbeater
Honored Contributor

Re: HP Network teaming.

OK no worries.
It would also be useful to see the output of that command, before and after the teaming process....

Rob