HPE Community
ProLiant Servers (ML,DL,SL)
1752800 Members
5630 Online
108789 Solutions
New Discussion

Re: HP Nic teaming question

 
Ascendo
Occasional Advisor

‎03-28-2010 09:47 PM

‎03-28-2010 09:47 PM

HP Nic teaming question

We have DL385 servers with 4 NICs, and would like to team the NICs in the following manner:

- NIC1+2 -> switch 1
- NIC3+4 -> switch 2

We'd like each pair to be an Etherchannel to provide a 2Gbps fault tolerant configuration. SLB is not suitable for our requirement - we need 2Gbps between the servers. We also need redundancy should one of the switches fail.

Is the above configuration possible?
0 Kudos
Reply
1 REPLY 1
Michal Kapalka (mikap)
Honored Contributor

‎03-28-2010 10:43 PM

‎03-28-2010 10:43 PM

Re: HP Nic teaming question

hi,

check this white paper :

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01415139/c01415139.pdf

mikap
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.