ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP P2000 G3 Dual Controller 4 port iSCSi ip addresse's cannot be ping from same network.

Atif Noor
Occasional Advisor

HP P2000 G3 Dual Controller 4 port iSCSi ip addresse's cannot be ping from same network.

HP P2000 G3 Dual Controller 4 port iSCSi  ip addresse's cannot be ping from same network or even direct attach

 

Hi all we have a P2000 iSCSI SAN. we  have connected all the ports and the two management interfaces. We can get to the management interfaces. All the iSCSI ports are addressed and connected. I can ping only the management interfaces from other devices on my network but I can't get ping from the iSCSi ports/ip's. And the iSCSI initiator can not be connected to the SAN at all.

are we missing any configuration step or any utility/software requires in order to get iSCSi port ip's get ping.

Kindly note that iSCSi ports are 1GE ports

Kindly also note the Host Discovered status as no in the snap attached with this post

 

Kindly Help Us in this Regards,

Thanks & Regards,

Atif Noor

 

1 REPLY
Ali
HPE Pro

Re: HP P2000 G3 Dual Controller 4 port iSCSi ip addresse's cannot be ping from same network.

Hi,

 

following docs may be of some help

 

http://www.hp.com/hpinfo/newsroom/press_kits/2010/JustRightITopk/best_practices_P2000.pdf

 

Check the troubleshooting section of this guide:

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02006876/c02006876.pdf

 

 

How to Say Thanks... Click on Star Kudos

 

Cheers!

Aftab

I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details