ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP P411 Changeing Cache Read 50% Write% where to change

HP P411 Changeing Cache Read 50% Write% where to change

Hi,

on a backupsystem with a P411 Smartarray Controller with a diskcabinet the backupjob is very slow with Symantec Backupexec on one drive.

This drive has 100% read and 0%write configured. Where can I change afterwords the settings from 100& read to  50% read and 50% write?

Thanks a lot!

 

 

 P.S.This thread has been moved from  Servers>General  to ProLiant Servers (ML,DL,SL)-HP Forums Moderator

1 REPLY

Re: HP P411 Changeing Cache Read 50% Write% where to change

Refer to sections "Setting the rebuild priority or expand priority" and "Setting the accelerator ratio" on page 16 of the Configuring Arrays on HP Smart Array Controllers Reference Guide, locatable at the following link:

 

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00729544/c00729544.pdf

 

 

 

Regards,

 

Vijayasarathy

I work for HP
To say thanks click the white "thumbs up" icon below!!!