ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP PROLIANT ML110 G6 BEEPING

 
viktortras
Occasional Visitor

HP PROLIANT ML110 G6 BEEPING

Hello I have a Proliant ML110 G6 and I when I turn it on it beeps 4-3-3-1 short beeps,anyone have solved it?? I have try many differents memory modules, change PSU, change processor but it does not seem to be the problem!I have to tell I noticed it when I woke up a morning and see my two servers down, one was ok but off(hp microserver gen8) but proliant ml 110 g6 does not boot.

I have access to 100ILO but I have no video and fan goes at full speed all the time.

1 REPLY 1
Paul_J_K
HPE Pro

Re: HP PROLIANT ML110 G6 BEEPING

Hi @viktortras ,

Among the symptoms, you have mentioned another Microserver Gen8 also being OFF but found to be OK later on. 

Unable to identify the given beep code however I strongly suspect some kind of a power related event (like a voltage brownout or something related to the input power source like a UPS, Power strip, PDU, etc) which might have triggerred this and possibly a system board failure. 

 

I am an HPE employee
Accept or Kudo