HP PROLiant DL380 G5 Mirror LED is OFF

[pico-pala-man]

Hallo! I install and configure Smart Array P400 Controller (on server 2003) to use RAID5 and when i use diagonostic tools, there is: no problems detected, but on My server on front panel the mirror led is OFF. It's OK or what? Everywhere is writen, that my RAID 5 is ok. HOW to know, is RAID5 working.

[Louis Henninger_1]

The display panel on the front should be blank or all LED's off. This will provide a visual indicator if a problem develops.
It's kinda like "no news is good news..."

As for Raid 5 working, run ACU and check the logical drive presented. This should give you settings for drive array, etc. Note while you are in the ACU and have a logical drive selected, all LED's will flash on the disk drives, this is normal.

Regards,

Louis

[Brian_Murdoch]

Hi,

The Mirror LED on the panel represents memory mirror - It has nothing to do with raid or disk configuration.

Please see attached document.

Regards,

Brian

[pico-pala-man]

Thanks for Help.

[KarloChacon]

hi pico-pala-man

is the answers were helpful don't forget assign points

regards

[KarloChacon]

hi pico-pala-man

if the answers were helpful don't forget assign points

regards