ProLiant Servers (ML,DL,SL)
1748204 Members
3225 Online
108759 Solutions
New Discussion

Re: HP ProLiant DL180 G6 не включается

 
Amil73
Occasional Visitor

HP ProLiant DL180 G6 не включается

При включении сервера HP ProLiant DL180 G6 запускаются куллеры, мигает лампочка BMC ACT и больше ничего не происходит. На мониторе изображения никакого нет. Подскажите в чем может быть проблема и что можно сделать. Так же вздулась батарея рейд контроллера  battery module for use with the Smart Array  HSTNM-B011. 

2 REPLIES 2
Parvez_Admin
Community Manager

Re: HP ProLiant DL180 G6 не включается

Hi Amil,

Thank you for choosing HPE Community Forum. Could you please re-post your question here in English? This will help everybody in the Forum understand the discussion and allow them to participate as well. Thanks.


Thanks,
Parvez_Admin
I work for HPE
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
CM_Cert_Logo_Color.png
Amil73
Occasional Visitor

Re: HP ProLiant DL180 G6 не включается

HP ProLiant DL180 G6 is do not working.
When the HP ProLiant DL180 G6 server turn on, begin run coolers, indicator BMC ACT flash light and nothing else happens. , No image on the monitor. Tell me please what could be the problem and what can be done. And swollen battery Raid Controller battery module for use with the Smart Array HSTNM-B011.