ProLiant Servers (ML,DL,SL)
1748169 Members
3983 Online
108758 Solutions
New Discussion юеВ

Re: HP ProLiant DL180 G6 Server series Hard Drive Issue!

 
Arthur Preetham
New Member

HP ProLiant DL180 G6 Server series Hard Drive Issue!

i have two "HP ProLiant DL180 G6 Server series" and i have eight 250GB SATA HDD, am tying to conntect 4HDD's for 1 server and other 4HDD's for other Server but .. both servers detect only 3 HDD's not more than that ! if i try to connect 4 or 5 it show 750GB only .. i.e. 3HDD's... .. So My "HP ProLiant DL180 G6 Server" is detecting only 3 HDD's not more than that ... i have installed "Windows Data Center 2008 Server" for the server .... can any one one help me with this issue ???
3 REPLIES 3
TTr
Honored Contributor

Re: HP ProLiant DL180 G6 Server series Hard Drive Issue!

The four HDD connect to a raid controller. Then they are bound into logical disks.

Where do you see only 3 HDDs detected?

Re: HP ProLiant DL180 G6 Server series Hard Drive Issue!

Hi HP, All,

I have a similar problem. I bought two Storage disks with compatibility with my server (461137-B21) Two disks of 1 TB. I turned off the Server put the disks in, turned it on and it didn't recognize them. I need to know where can I find a process on how to install them in the BIOS or by software.

This is really important for me.

I will appreciate your quick response.

Thank you very much in Advance,

Salvador Mazzochi

Re: HP ProLiant DL180 G6 Server series Hard Drive Issue!

I forgot to say I have one disk installed already with Windows Server 2003.

Thank You,