HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant DL320 G5p Fan Solution Not Sufficient

Occasional Visitor

HP ProLiant DL320 G5p Fan Solution Not Sufficient

Good morning, recently I had a problem with my HP ProLiant DL320 G5p server, I was using it normally when I suddenly turned it off and did not want to call anymore, and every time I try to connect it it appears the following message:
"1611-Fan 4 Failure"
"Fan Solution Not Sufficient"
"Critical Failure detected - System shutting down in 4 Seconds!"
He says that Fan number 4 is faulty but, I do not own Fan number 4, he came with 3 Fan's only.
I hope you can help me with my problem.

Re: HP ProLiant DL320 G5p Fan Solution Not Sufficient


Was there any hardware or firmware changes done to this server recently?

Clear NVRAM from the dip switch or swap the fan from slot 3 into 4 and see if the error disappears.

Thank You!
I am a HPE employee.

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers