HP ProLiant DL320 Server

[paulozanette]

it presents the following message in the boot:

"1611-Fan 7 Failure
Fan Solution Not Fully Redundant"

how to decide this problem?

Paulo_Zanette

[KarloChacon]

possible cause: a redundant fan is not spinning.

action: replace the failed fan

this server assuming G1 has 7 fans

see the picture attached

taken from
ProLiant DL320 Server Maintenance and Service Guide

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179911&taskId=101&prodTypeId=15351&prodSeriesId=341291

http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_203834-003_rev3_us/TPM_203834-003_rev3_us.pdf

regards

[paulozanette]

Tank´s Karlo,

All fans are functioning perfectly, does not have none with rotation problem. and I did not find the G1 that you he mentioned.

The picture attached alone this the identification of FAN 1 until FAN 6, where is FAN 7?

[KarloChacon]

well in the picture fan 7 is referred as 6

try swapping the fans so you're gonna determine
which fans is not working OK

regards