ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant DL320 Server

paulozanette
Occasional Visitor

HP ProLiant DL320 Server

it presents the following message in the boot:

"1611-Fan 7 Failure
Fan Solution Not Fully Redundant"

how to decide this problem?

Paulo_Zanette
3 REPLIES
KarloChacon
Honored Contributor

Re: HP ProLiant DL320 Server

possible cause: a redundant fan is not spinning.

action: replace the failed fan

this server assuming G1 has 7 fans

see the picture attached

taken from
ProLiant DL320 Server Maintenance and Service Guide

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179911&taskId=101&prodTypeId=15351&prodSeriesId=341291

http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_203834-003_rev3_us/TPM_203834-003_rev3_us.pdf

regards
Didn't your momma teach you to say thanks!
paulozanette
Occasional Visitor

Re: HP ProLiant DL320 Server

Tank´s Karlo,

All fans are functioning perfectly, does not have none with rotation problem. and I did not find the G1 that you he mentioned.

The picture attached alone this the identification of FAN 1 until FAN 6, where is FAN 7?

KarloChacon
Honored Contributor

Re: HP ProLiant DL320 Server

well in the picture fan 7 is referred as 6

try swapping the fans so you're gonna determine
which fans is not working OK

regards
Didn't your momma teach you to say thanks!