HP ProLiant DL380 G6 Server

[Training and Education_1]

Folks, I am new to this environment. Pardon me if this question is very fundamental.

Any HP ProLiant DL380 G6 Server configuration I see is not listed with Hard drive. My question. When I order HP ProLiant DL380 G6 Server, What should I do to add the appropriate harddrive for HP ProLiant DL380 G6 Server and how to choose the best.

Appreciate your response. Thank you

[Khairy]

hi,

you can refer quick spec of this model. Refer below:

http://h18004.www1.hp.com/products/quickspecs/13234_na/13234_na.html#Models

There are a few factory integrated which already comes with parts config, eg, 2x 4gb dimm, 4 x 146gb etc etc. You can choose any of this models and add more by specify the disk part number in your order .

read thru the quick specs as its very straight forward for proliant servers.

Rgds

PS : i appreciate if u could assigned some points.

[Michal Kapalka (mikap)]

hi,

use the HP configurator, they will help you

http://h30099.www3.hp.com/eGlue/eco/begin.do

==> Configure ==> (select your model {DL 380 G6 ]) and them you will be able to see what is possible to put into the server.

mikap

[marcus1234]

configurator has many issues do not uses it quite evident when trying to configure dimms in servers with 2 processors

feks take a dl380 g6 with 2 processors and standard dims watch where it advises you to put them