HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant DL380 G9- RAID Reconfiguration

 
Anas-sh
Occasional Contributor

HP ProLiant DL380 G9- RAID Reconfiguration

Dear All,

Good day

I've new DL380 G9 server with 5 SAS Disks (300GBX5) as Raid6.

Now I need to reconfigure the controller to make the following:

1st HDD+ 2nd HDD = Raid 1 to install WinServer on it.

3rd+4th+5th HDD= Raid 5 for Databases and other files.

Can you give me the steps to do that?

 

 

 

1 REPLY
Jimmy Vance
HPE Pro

Re: HP ProLiant DL380 G9- RAID Reconfiguration

During POST when the controller firmware reports to the screen, you can press F5 to start SSA, or during POST press F10 and select SSA from the menu.  When in the SSA Application, you will need to clear the current configuration which will destroy all existing data.  Next create a new array, add the first and second drive to the array. Once that completes, create a second arrray and add the rest of the drives and select RAID 5

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!