ProLiant Servers (ML,DL,SL)

HP ProLiant DL380 Gen 9 refuses to boot to windows

 
Uchifizzle
Occasional Visitor

HP ProLiant DL380 Gen 9 refuses to boot to windows

Hi,

HP ProLiant DL380 Gen 9 server running on windows server 2012 R2 keeps giving wrong time, even after I set in in date and time setting, so I had to change the CMOS battery.  After replacing the CMOS battery with another one, when I powered on the HP ProLiant Dl380 server it refuses to boot to windows, it keeps showing NO BOOTABLE DEVICE.  I had to change to the old CMOS battery, but it is still showing the NO BOOTABLE DEVICE Error.

Please, would need help resolving this ASAP. 

2 REPLIES 2
Uchifizzle
Occasional Visitor

Re: HP ProLiant DL380 Gen 9 refuses to boot to windows

In reference to my earlier post, I performed a Restore Default System Settings, and restarted the Proliant dl380 Gen 9 server.  When the server powered on, this time it started showing

>> Booting Embebeded LOM 1 Port 1 : HPE Ethernet 1GB 4-port 331i Adapter - NIC (PXE IPv4)

>> Booting PXE over IPv4. 

This server is a critiical server handling activities in my company's environment and an immediate help in resolving the problem is most appreciated.

SanjeevGoyal
HPE Pro

Re: HP ProLiant DL380 Gen 9 refuses to boot to windows

Hello,

 

Make sure server is updated with the latest bios and firmware to avoid date & time issue or save the system bios configuration.

 

Follow the below  customer advisory for select the system boot option.

HPE UEFI Deployment for HPE ProLiant Gen9 Servers - Local HDD Boot Deployment in UEFI Mode

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c05088330

 

or

UEFI System Utilities User Guide for HPE ProLiant Gen9 Servers and HPE Synergy ( follow the page no#58)

https://support.hpe.com/hpesc/public/docDisplay?docId=c04398276


I am a HPE Employee

Accept or Kudo