ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant DL380e Gen8 E5-2420v2 Server, 12GB-R, 12 SAS/SATA LFF

 
RustemGas
Occasional Contributor

HP ProLiant DL380e Gen8 E5-2420v2 Server, 12GB-R, 12 SAS/SATA LFF

Hard disk not working properly? Only the replacement ? Make Report...

 

2 REPLIES
mich_a
Occasional Advisor

Re: HP ProLiant DL380e Gen8 E5-2420v2 Server, 12GB-R, 12 SAS/SATA LFF

Dear RustemGas,

 

Thank you for joining the community!

Based on the attached Array Diagnostic Report there are indications of a failed hard drive.

We recommend to log a case to your local HP support team & provide them with the report.

 

In addition, it is recommended to proceed and create a backup of your current data in order to avoid potential data loss.

In order to get in contact with HP support you may follow the below link:

http://www8.hp.com/us/en/contact-hp/support.html

 

Regards

I'm an HP employee
I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

If you feel this was helpful please click the KUDOS! thumb below!
Blackie21
Advisor

Re: HP ProLiant DL380e Gen8 E5-2420v2 Server, 12GB-R, 12 SAS/SATA LFF

Hello RustemGas,

 

HDD in possition  2I:1:2 has some reading issues - probably bad blocs.

 

There were also several rebuild tries in the past but rebuild always failed with HDD write error – “Rebuild aborted due to write error”.

 

I would suggest to contact your local support to decide about HDD replacement.  Trying to rebuild affected HDD again and again could cause some troubles.

 

BR

 

Blackie21

 

 

- If you found this answer helpfull please click the KUDOS - thumb below!

- I work for HP