ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant ML110 Drives Recognized

 
Jerry Cutchens
Occasional Visitor

HP ProLiant ML110 Drives Recognized

Hello.
Recently ordered an HP ProLiant ML110 Server.
Running Windows Server 2003.
Ordered the system with two hard drives - 160GB 7.2K NHP SATA Drives.
I setup the server and have one of the drives partitioned with the OS and the second partition for data. The Second physical drive is not showing up in windows explorer. My question is how do I get the second drive to be recognized by the system and be accessible through windows explorer? Great advance thanks for any assistance!!
3 REPLIES
Dave GLeason
Occasional Visitor

Re: HP ProLiant ML110 Drives Recognized

Go into disk management and see if the drive is there. It just might need to be formated and a drive letter assigned.
Jerry Cutchens
Occasional Visitor

Re: HP ProLiant ML110 Drives Recognized

I did and the second drive is not listed.
I cracked the case and physically check to ensure that both the physical drives are attached properly. Thoughts?...
Great thanks for any/all advice!!
Víctor Cespón
Honored Contributor

Re: HP ProLiant ML110 Drives Recognized

Ons basic question, that server has RAID enabled?
Check on the server BIOS:
Main:
-> Advanced:
-> Advanced Chipset Control
-> Serial ATA:
-> SATA Controller Mode Option:
-> SATA RAID Enable: