HP ProLiant ML110 G5 - Problems with embedded RAID

[emcom]

Hello everybody,

I have some problems with the embedded RAID Controller of a HP ProLiant ML110 G5.

This server is actualy running with the following driver(s):

Adaptec Serial ATA HostRAID

Date 10/18/2010

Version 1.5.17023.0

-and-

Adaptec Processor Device (Pseudo)

Date 11/29/2007

Version 1.4.17015.0

Problem:

One of the RAID1 drives failed and I removed it. Now I purchased two new drives with bigger capacity. Because it is not possible to resize the actual RAID-Volume at this controller, i want to create a new RAID array on the new drives and restore a backup on them.

If i do so (unplug the runnig drive, plugin the two new, create a new array, runnig Windows 2008 R2 revovery CD) Windows does not recognize the created RAID Volume. But even if I submit the above drivers, it does not work.

My Question:

Is this driver the correct one? With which it would work? Could there be other problems?

Thanks for your help!

Greetings,

Dennis

[MiguelC]

Never do Hardware Raid mix with software Raid, I test it for experience and loose the software mirror and information at other array.

Sorry for the other reply

Good Luck