HP ProLiant ML110G7 in Power Standby

[aeyjay]

I just had circuit break flip. When it flipped I heard a pop where my server and desktop are located. After returning from resetting my breaker, I started turning everything back on. All item turned on as always except my server. I started troubleshooting and even replaced my system battery. I have back ups on external drives. I have searched several forums and saw the same issues a blinking light near the system maintenance switch. The power button amber, the power status amber, system health LED is green, and the UID turns blue when pressed.

[MV3]

Hi Aeyjay

Good day!

Did you try reseating the Power supply 1 and 2.

Do a Power drainand check if the server is powering on. Remove all the power cables and Press and hold the power button for 10-15 sec.
Reseat the power cables and check for the issue.

Do revert back with the outcome.

Cheers.