ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant ML150 G6 Server hard drive problem

CHF-RYADA
Visitor

HP ProLiant ML150 G6 Server hard drive problem

i have an old 

HP ProLiant ML150 G6 Server with windows server 2003 that has 3 disk 1 ,2 ,3 TB , irecently buy new wd 4 tb green but the problem that it sees only 1.7 tb 

regards 

 

 

P.S. This thread has been moved from Servers>General to ProLiant Servers (ML,DL,SL). -HP Forum Moderator

3 REPLIES
scharchouf
Trusted Contributor

Re: HP ProLiant ML150 G6 Server hard drive problem

Whixh type of Storage Controller you have on this server?

 

  • Performance model: HP Smart Array P410/256MB RAID Controller (RAID 0/1/1+0/5/5+0)
  • Base model: HP Smart Array P410 Controller (RAID 0,1std) Zero memory
  • Entry model: HP Smart Array B110i SATA RAID Controller (RAID 0,1,10

 

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details

CHF-RYADA
Visitor

Re: HP ProLiant ML150 G6 Server hard drive problem

thx for your reply  ,,,,

iam not talking about the raid the hards on the raid are working just fine, iam trying to connect the hards to the sata ports on the mother board , any way ithought that my problem was size limitation so i retairned the 4tb and get 2 of 2tb hard disks and now it only sees 3 hard disk at a time 

scharchouf
Trusted Contributor

Re: HP ProLiant ML150 G6 Server hard drive problem

My question is about controller card installed on this server?

Normally when HDD is attached to MOBO the RAID is controlled by Software not the card.

 

I work for HP
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details