ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ProLiant ML350 G6 - F8 to access iLO2 setup doesn't appear

GonzaloMDP
Occasional Visitor

HP ProLiant ML350 G6 - F8 to access iLO2 setup doesn't appear

Hi:
We have a HP Proliant ML350 G6 server. We disable the iLO 2 on this server due to constant error messages into Windows event log and since then, the fans started to spin faster than usual. Then we wanted to re-enable iLO 2; for this:
* Turn off the Server
* Set the Switch S1 in position ON
* Wait for the message "press F8 to access RBSU"  appeared, however it never did. The F8 key, however, leads us to the ROM configuration for Array Utility.


We send pictures of boot screens.


Hope you can help. Thank you

1 REPLY
Suman_1978
HPE Pro

Re: HP ProLiant ML350 G6 - F8 to access iLO2 setup doesn't appear

Hi,

 

Some suggestions:

1. Clear NVRAM from System Maintenance Switch.

If clearing NVRAM does not work.

2. Update BIOS and iLO Firmware and see if that makes a difference.

 

https://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?docId=mmr_kc-0108967

 

Thank You!
I am a HP employee.