I need some advise for replace 146GB to 300GB on HP prolaint server urgently. Currently, the system have 2 146Gb for C drive and 4 x 146Gb for D drive(292Gb). The running Server is being replaced with 146Gb hard disk (as attached) with 300Gb hard disk. But the capacity of the C drive and D drive, does not increase to 300Gb and 600Gb for C drive and D drive respectively. Can anyone please kindly advise how can I increase the C and D drive without affecting the current software installed.
Check with HPE Pre-Sales to help with this.
Chat with our presales specialists.
MargaretN
HPE Community Manager
Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise
You need to expand the logical drive, then using tools within the OS you will need to expand the partition or create a new partition to utilize the extra space
A good palce to start would be with this document
I found this one with a quick search, there are more detailed documents on the site
__________________________________________________
No support by private messages. Please ask the forum! I work for HPE
If you feel this was helpful please click the KUDOS! thumb below!
