ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Prol ML110 PCI-X

kostaska
Occasional Visitor

HP Prol ML110 PCI-X

Hello,
I have a proliant ML110 Server. I am wondering if the adaptec SataII raid controller 2420SA is suitable for my server.
My server has 2 PCI 32-bit/33MHz PCI at 3.3 Volt and
the adaptec 2420SA controller works at 64bit/133MHz.

Thanks
1 REPLY
Ruslan
Respected Contributor

Re: HP Prol ML110 PCI-X

Post the Generation of your server. Note that depending on the model, there are two cabling configurations for SATA storage:
- Hot plug SATA models use a 4-in-1 cable which connects from the backplane to the connectors on the 6-port SATA RAID controller as shown here. Only (4) ports are used from the card to support (4) drives.
- Non-hot plug SATA models cable in a 1-to-1 configuration. The SATA controller for non-hot plug is integrated on the system board and provides four connectors. Each hard drive cables to one of four connectors.