ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant DL120 G5 Raid problem

 
SOLVED
Go to solution
emammadov
Occasional Contributor

HP Proliant DL120 G5 Raid problem

Hello,

We have an issue on HP Proliant DL120 G5. Though I have created Raid 1, either Windows Server or VMware ESXI see 2 hard drives instead of 1 hard drive. What causes this to happen? Thank you in advance.

3 REPLIES
stuart_xu
HPE Pro

Re: HP Proliant DL120 G5 Raid problem

hi,Sir

May I know which OS  types you installed. first you shoudl check the HPE OS matrix website to confirm this DL120G5 can support or not support the OS.

http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/windows.aspx#.Wm_XA_kdgZR

second,if the OS recognized the two separate hard drive ,that means the OS have not recognized the raid controller.so you should insert  the raid controller driver by manual when install the OS.

I am an HPE Employee.

 

I am a HPE Employee.
emammadov
Occasional Contributor

Re: HP Proliant DL120 G5 Raid problem

Thank you for your reply. I want to install ESXi 5.5 on Raid 1. I tried to boot with HPE ESXI Custom image, but didn't get the result. I had a look at the link you mentioned, but DL120 G5 is not listed, the oldest version of DL series is DL120 G6 in that list.

stuart_xu
HPE Pro
Solution

Re: HP Proliant DL120 G5 Raid problem

hi,SIr

 

thanks for your reply,correct  , the DL120G5 does not support the esxi5.5 .

 

I am a HPE Employee.