ProLiant Servers (ML,DL,SL)

Re: HP Proliant DL360 G7 server error processor

Occasional Contributor

HP Proliant DL360 G7 server error processor

Good morning,
I have a HP Proliant DL360 G7 server that inexplicably went off alone to the Toggle Next startup presented the following error:
Health LED red light on and the red light on processor 1 on System Insight Display.
If I turn it off and relight the problem remains plus the server enters loop as it tries insistently to reboot itself.
I already tried to eliminate all the additional components (ram hdd, network cards etc.) I have already reset the bios also having a second processor is also in error, I also tried to use only one but the problem it remains.
I hope someone can give me an indication to sirolvere the problem.
Thank you

Fritsch James
Frequent Advisor

Re: HP Proliant DL360 G7 server error processor

If your server shows a processor failure this usually means that there is a problem with your cpu, cpu socket or maybe cpu cooling. If the server does not work in a single cpu configuration there could also be a problem with your mainboard. Be sure to put the memory modules in the correct slots when trying with a minimal RAM configuration. Is the firmware up to date on this machine?