Community
ProLiant Servers (ML,DL,SL)
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

HP Proliant DL360 G9 Boot Controler Change

 
swin_tech_uk
swin_tech_uk
Occasional Visitor

‎10-10-2017 01:01 AM

‎10-10-2017 01:01 AM

HP Proliant DL360 G9 Boot Controler Change

I have looks around but have not been able to find a solid answer or solution.

I have a DL360 G9 with 2 controlers. (1 x P440 and 1 x P440ar)

The Embedded P440ar consists of 8 x 900GB HDD split into 2 RAID5 Drives of 3 disks each and 2 spares

The P440 in Slot 2 consists of 2 x 300GB HDD configured to a simple RAID1 Drive onto which i have installed 2012 R2.

I initially configured the P440 and installed the OS onto it and everything was happy. I then configured the P440ar using HP SSA and as soon as i reboot the server the boot controler is set to attempt to boot from the P440ar which as you can is the wrong controler as the OS is on the P440ar.

I have looked all through the BIOS and there is no where to change this. I am desperate for some help.

 

Thanks

 

0 Kudos
Reply
1 REPLY
swin_tech_uk
swin_tech_uk
Occasional Visitor

‎10-10-2017 01:12 AM

‎10-10-2017 01:12 AM

Re: HP Proliant DL360 G9 Boot Controler Change

I am aware of this document from HP which tells you to change the boot controler order but i do not have this option.

https://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c03284581&_sm_au_=iVV55mSNZ7JTMfZH

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.