HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant DL360G4 - No display

 
Ravindar Chahal
Occasional Visitor

HP Proliant DL360G4 - No display

I have a HP Proliant DL360G4 which has no display. It does power up and then idle back down and appears to trigger the disks to spin; however, there is no display. Initial thought was that there was a hardware issue with the MB so we replaced the motherboard with newer one, but still same issue. There is practically no information on the HP website on this issue. Also, just to note, there are no amber lights on the motherboard, just some green status lights across the board. Any help or further information would be appreciated. Thanks in advance!
4 REPLIES
ess
Super Advisor

Re: HP Proliant DL360G4 - No display

Hi
if you replace cpu and ram this server?
test this item and answer my.
tanks.
Johan Guldmyr
Honored Contributor

Re: HP Proliant DL360G4 - No display

Sometimes a reseat of the components fixes the problem. Resetting NVRAM might also help in some cases.
Ravindar Chahal
Occasional Visitor

Re: HP Proliant DL360G4 - No display

Turned out that this was a CPU issue. There is dual CPU's on this machine. I took out CPU0 and put into CPU1 and was able to get the display, but with only one cpu. will need to get another.
Johan Guldmyr
Honored Contributor

Re: HP Proliant DL360G4 - No display

Awesome, don't forget to give points to posts :)