ProLiant Servers (ML,DL,SL)

HP Proliant DL380 Gen9 OS (RHEL 7.9) Installation Issue

 
shozib
New Member

HP Proliant DL380 Gen9 OS (RHEL 7.9) Installation Issue

Hi Everyone,
As stated in the subject I am having issue while installing OS. The issue is. There was already an OS (RHEL 6.8) was running on the server. I wanted to re install the OS. For that, I rebooted the server and entered to Smart Storage Administrator. From there I deleted the existing logical drive and created a new array. After that when I rebooted the Server to install the OS ( via bootable USB having Rhel 7.9 media).
I got the first screen where is says:

Install the Red Hat Entripise Linux 7.9

When I hit enter it then moved to the next screen, then I recived these errors:

  • the BIOS has corrupted hw-pmu resources
  • No caching mode page found
  • Assuming drive cache write through

then a loop of this error:

  • dracut-initqueue{1072}: Warning dracut initqueue timeout - starting timeout scripts

after this error loop it then displayed, 

  • Could not boot.
  • /dev/root does not exist
  • Starting Dracut Emergency Shell...

 

This is the state my server is currenty in. Could anyone of you get me out of this? please I have been stuck here from many hours..!
Your help would be much appreciated.
Thanks

Shozib

 

2 REPLIES 2
ksram
HPE Pro

Re: HP Proliant DL380 Gen9 OS (RHEL 7.9) Installation Issue

Hi @shozib ,

Thank you for the Post.

Please try the below or to der to get rid of the error messages, create a file under /etc/modules-load.d to load the driver usb-storage during the boot time:

# echo "usb-storage" >> /etc/modules-load.d/usb-storage.conf

Thank you Ram


I work for HPE

Accept or Kudo

ksram
HPE Pro

Re: HP Proliant DL380 Gen9 OS (RHEL 7.9) Installation Issue

Hi @shozib ,

Good day!

May we please know if the steps helped and the current status of the Installation.

Thank you

Ram


I work for HPE

Accept or Kudo