ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant DL580 G7 with P410i Smart Array controller

gmichael
Occasional Visitor

HP Proliant DL580 G7 with P410i Smart Array controller

Greetings all.  I have a simple question, but can't seem to find an answer to it.  Is there a way to disable the P410i Smart Array controller from the command line or otherwise outside of the Controller's BIOS?

 

thanks in advance!

1 REPLY
Suman_1978
HPE Pro

Re: HP Proliant DL580 G7 with P410i Smart Array controller

Hi,

 

The best option is, NOT to connect any cables to integrated controller if not in use.

As far as I know, within the BIOS or outside the BIOS, there is no such option to delete/disable controller.

 

During POST, Press F6 after P410i initializes and it will take you to Controller CLI and an option is available "Controller Delete".  Check the attached pic in this post.

But I am not sure if that actually disables the controller (proceed at your own risk).

 

Good Luck!

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers