HPE Community
ProLiant Servers (ML,DL,SL)
1753479 Members
5114 Online
108794 Solutions
New Discussion

HP Proliant G6 question concerning RAID 1 (500G to a 600G)

 
SOLVED
Go to solution
codou
Occasional Collector

‎02-09-2017 03:28 AM

‎02-09-2017 03:28 AM

HP Proliant G6 question concerning RAID 1 (500G to a 600G)

hi i have a HP Proliant with 2 500G SAS Disk configure in RAID 1, but i got recently an warning event (in the event viewer ) to warn me about a possible disk failure of one of those disk .

 

we got some spare 600 G SAS Disk compatible with this Server , but i would want to know if the Raid of this Hardware is still working between a 500G disk and a 600G disk ? even if my 600G isn't used to full Capacity .

 

 

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎02-09-2017 03:41 AM

‎02-09-2017 03:41 AM

Solution

Re: HP Proliant G6 question concerning RAID 1 (500G to a 600G)

No problem to replace a disk with a larger drive, only the smaller capacity will be used.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
codou
Occasional Collector

‎02-09-2017 03:46 AM

‎02-09-2017 03:46 AM

Re: HP Proliant G6 question concerning RAID 1 (500G to a 600G)

Thank you very much for your fast reply.

 

(Free Kudo for this ;D)

 

it helps

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.