HP Proliant ML 150 G3 with no floppy SAS Model

[Karun Saxena]

Dear ,
How can I install HP Proliant ML 150 G3 SAS Model I am using only SAS Hard Disk but no floppy drive is there



Thanks & Regards

Karun Saxena

[ess]

hello dear
you can whit download nlite for install operating system .
you download : http://www.nliteos.com/

[Capel]

hi

SAS Hard Drives OK

would you ,ind to tell us which Controller server has fr those SAS hard Drives?

HP SC44Ge Host Bus Adapter

HP 8 Internal Port SAS Host Bus Adapter with RAID

e200 ??

in that way we can tell you which driver download

----------

the process to install that is

enable RAID in BIOS as it is described here

ProLiant ML110 Generation 2, ML110 Generation 4, ML110 Generation 5, ML150 Generation 2, and ML150 Generation 3 Servers

page 39

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00260539/c00260539.pdf

Once RAID is enable and configure (page 40 how configure RAID)


you download the drivers for your controller and add them to nlite

"nLite is a superb little tool that enables you to add external drivers and Windows updates to your original Windows installation CD creating a new windows CD"

so in that way you wont need any floppy because the drivers for your controller will be in the new CD you create

http://www.nliteos.com/download.html

regards

[Capel]

check this


http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=455149&prodTypeId=15351&objectID=c01158965

regards