ProLiant Servers (ML,DL,SL)

HP Proliant ML 350 G6 want boot or show bios dead /black screen

 
SOLVED
Go to solution
howard79
Occasional Contributor

HP Proliant ML 350 G6 want boot or show bios dead /black screen

Hi i tryed a lot now.

i changed the cpu, the ram, the bios battery the psu but sitl i got the same problem.

led nr 2 on frontpanel is blinking red and it power up but shows orange light on memory slots.
the green led in the bottom of motherboard is blinking green.

what can i do and what can it be?

i have tryed minimum setup but stil same problem, i tryed all ram slots still same problem.
and i tryed to clear nvram, stil same problem.

can anyone help me please

3 REPLIES 3
howard79
Occasional Contributor

Re: HP Proliant ML 350 G6 want boot or show bios dead /black screen

ILO says :

Memory Configuration Error: System boot halted

 

 i tryed to swap the memory modules with one working ML 350 G6.
but it didnt help at all. ILO still says Memory Configuration Error: System boot halted
what can be wrong now ? and i cleard nvram with switch 6 first. but still get the same error.
does anyone have a clue?

hshrib
Advisor

Re: HP Proliant ML 350 G6 want boot or show bios dead /black screen

Hello

 

As the sever is powering on but there is not display, I see you tied with changing the CPU and DIMM, also cleared NVRAM.

Looking at this, we suspect the issue to be with system board.

Thanks You
I am an HPE Employee
howard79
Occasional Contributor
Solution

Re: HP Proliant ML 350 G6 want boot or show bios dead /black screen

I change the system board and everything works like a charm. Problem solved