ProLiant Servers (ML,DL,SL)
1748169 Members
3996 Online
108758 Solutions
New Discussion юеВ

HP Proliant ML 350 cannot load Unix Sco 5.0.5

 
Kud
Occasional Contributor

HP Proliant ML 350 cannot load Unix Sco 5.0.5

I cannot load Unix Sco 5.0.5 on my ML350. Sco is failing to see my SCSI disk. A "no disk present" error comes up
4 REPLIES 4
nurascorpio
Regular Advisor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

Hi Kud,

Which generation is your ML350? the model of the controller used in the server.

Customer Advisory :

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EU010427_CW01

Please let us know more info on the issue.

Regds
NS
ramesh_naik_
Esteemed Contributor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

Hi Kud,

Not an expert on this this.

But I found a similar post earlier!!!!!!


You may want to try this!!!

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1036156

Regards,
rmn
Kud
Occasional Contributor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

sorry my internet connection was down. the server is a HP Proliant ML 370 G4 When i boot with a Unix Sco 5.0.5 cd the following erro appears

"WARNING: HD: no root disk controller was found"

I got no joy by disconnecting other hard disks. Surprisingly i managed to install linux on the same server. I therefore suspect that the problem has something to do with missing drivers.
ramesh_naik_
Esteemed Contributor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

Hi Kud,

Then you would have to give it a try....

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1036156

Hope this works!!!!!

Regards,
rmn