ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Proliant ML 350 cannot load Unix Sco 5.0.5

 
Kud
Occasional Contributor

HP Proliant ML 350 cannot load Unix Sco 5.0.5

I cannot load Unix Sco 5.0.5 on my ML350. Sco is failing to see my SCSI disk. A "no disk present" error comes up
4 REPLIES
nurascorpio
Regular Advisor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

Hi Kud,

Which generation is your ML350? the model of the controller used in the server.

Customer Advisory :

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EU010427_CW01

Please let us know more info on the issue.

Regds
NS
ramesh_naik_
Esteemed Contributor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

Hi Kud,

Not an expert on this this.

But I found a similar post earlier!!!!!!


You may want to try this!!!

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1036156

Regards,
rmn
Kud
Occasional Contributor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

sorry my internet connection was down. the server is a HP Proliant ML 370 G4 When i boot with a Unix Sco 5.0.5 cd the following erro appears

"WARNING: HD: no root disk controller was found"

I got no joy by disconnecting other hard disks. Surprisingly i managed to install linux on the same server. I therefore suspect that the problem has something to do with missing drivers.
ramesh_naik_
Esteemed Contributor

Re: HP Proliant ML 350 cannot load Unix Sco 5.0.5

Hi Kud,

Then you would have to give it a try....

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1036156

Hope this works!!!!!

Regards,
rmn