HP Proliant ML110 G3 Installation

[Tan Kia Sen]

I am having problem setting up the above hardware with SCSI controller (339051-001).
Pressing F6 with appropriate drive download also unable to detect the 2 unit of SCSI HDD installed.

My another question is can the above scsi controller support RAID ?

Advice of any kind would be really appreciated.

Cheers & Rgds,
Kia Sen

[SPa]

The part number specified is a SCSI controller and does not provide any Raid capability.

Try the below mentioned driver:

ftp://ftp.compaq.com/pub/products/servers/supportsoftware/zip/ml110w2kSCSI-1.09.08.zip

[nurascorpio]

Hi Tan,

Are you using a USB Floppy drive to install the drivers or a USB key ?

Regds

NS

[sandeep_raman]

Hello Tan,

This has been discussed in detail:

1.ML110 G3 does'nt come with floppy drive since its optional.
2.Only HP recommended floppy drives work with some struggle.
3.The only easy way to get this working is slipstream Service Pack and Raid drivers.

Additional information:

http://www.maximumpc.com/2005/01/how_to_slipstre.html
Though its for Xp,same steps for Win2k/2k3 will work.
http://www.nliteos.com/guide/

http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=985666

SRH