ProLiant Servers (ML,DL,SL)
1748139 Members
3826 Online
108758 Solutions
New Discussion юеВ

Re: HP Proliant ML150G6 Flashing BMC SDR/CONFIG....... Please wait.

 
ZHSV
Occasional Contributor

HP Proliant ML150G6 Flashing BMC SDR/CONFIG....... Please wait.

Good afternoon.
Updating the firmware HP Proliant ML150 G6 cp024879.exe

Unsuccessfully, after the launch here this inscription:

 

The system only has generic SDR? system will REBOOT after update default SDR!!! 
Flashing BMC SDR/CONFIG....... Please wait. 
DO NOT power cycle or reset the system? may take several minutes.....

 

The message shown on the screen is very buzzing fans, after 7 minutes the server reboots. I waited for 45 minutes, it rebooted 5 times. Nothing changed.

 

How to fix?

 

4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: HP Proliant ML150G6 Flashing BMC SDR/CONFIG....... Please wait.

Not sure what you used for the update, cp024879.exe is the USB key utility only.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ZHSV
Occasional Contributor

Re: HP Proliant ML150G6 Flashing BMC SDR/CONFIG....... Please wait.

Firmware set to USB. Now you can not choose where to boot, probably before this menu does not even reach.
Connected LAN to the Mgmt (LO100), the green LED flashes, but the IP is not getting.

Daniel_and
Visitor

Re: HP Proliant ML150G6 Flashing BMC SDR/CONFIG....... Please wait.

Hello,

Did yoi found solution ?

I am stuck on same screen now :(

regards

Daniel

kdegrande
Occasional Visitor

Re: HP Proliant ML150G6 Flashing BMC SDR/CONFIG....... Please wait.

Hi guy's,

I have the same problem with a HP ML150G6 which needed firmware update to run windows 2008 Server.- 64 bit.

Is it possible to stop this action, he is like in the same loop for about 2 hours as ZHSV has.